EV Charger Installation
EV charger installation in Andover and across Hampshire.
What’s involved
T2 Electrics & Plumbing install home electric vehicle charge points across Andover, Test Valley and the neighbouring counties. We fit 7 kW wall-mounted chargers from the main manufacturers, tethered or untethered, and connect them to a dedicated circuit from your consumer unit with the protection the regulations require.
Before quoting we check what your existing supply can take: the size of the main fuse, the state of the consumer unit and the earthing arrangement, since many older homes need an earth rod or a board upgrade before a charger can be fitted safely. We tell you exactly what’s needed and price the whole job, not just the charger.
Once fitted, the installation is certified, registered with the distribution network operator where required, and the charger is set up with its app so you can schedule cheap-rate charging from day one.
- 7 kW home chargers, tethered or untethered
- Dedicated circuit with correct protection
- Supply, main fuse and earthing checked first
- Consumer unit upgrades where needed
- DNO notification and certification
- App set-up for off-peak charging
Electricians near you
Other electrical services
Other electrical services
Electrical
- Electrical InstallationExperienced, local electricians for electrical installations across Andover and Hampshire.
- EV Charger InstallationHome EV charge points fitted, registered and ready to use, across Hampshire, Wiltshire and Berkshire.
- Inspection & TestingEICRs and electrical testing for landlords, buyers and homeowners who want to know the wiring is safe.
- Consumer Unit UpgradesReplace an old fuse board with a modern RCD-protected consumer unit, certified on completion.
- RewiringFull and partial rewires for older homes, extensions and renovations, planned around your decoration.
- Emergency Electrician & Fault FindingEmergency electrician for tripping circuits, dead sockets, burning smells and lost power. We find the fault rather than reset the breaker and leave.
Common questions
What people ask before booking ev charger installation.
Will I need an earth rod for an EV charger?
It depends on your supply type and the charger. Many homes on a PME supply either need an earth rod or a charger with built-in open-PEN protection. We check this on the survey and tell you which is cheaper before you buy a charger.
How long does an EV charger installation take?
Most installations are done in half a day. If the consumer unit needs upgrading or the cable run is long it can take a full day. If the main fuse needs upgrading, the network operator does that separately and it can take a few weeks to arrange.
Which areas do you cover for ev charger installation?
Everywhere within roughly 20 miles of Andover: Test Valley and north Hampshire, east Wiltshire including Tidworth, Amesbury and Salisbury, and west Berkshire including Newbury and Hungerford. If you’re just outside that, ask.
Arrange a quote
Tell us the job and the postcode and we’ll come back to you the same working day.
- 01264 000 000
- [email protected]
- Mon to Fri 08:00 - 18:00
Saturday by arrangement - 33 Loveridge Close, Andover, Hampshire, SP10 5ND